Home > Shop by Category > Gadgets > Juicers and Mills >

Weston Corn and Grain Grinder
Cast Iron Grinder with crank handle, 5 ½” diameter hopper, rubber base protector and counter clamp.


 
Alternative Views:


Item No. 36-3601-W
Our Price: $39.99

Availability: Usually Ships in 24 to 72 Hours

Description Use & Care Recipes & More
 
Great for making cornmeal from dehydrated corn. Used by home brewers to crack malted barley, oats, and other grains. Also a beloved tool of farmers for making chicken feed.
Features
  • Large, heavy-duty, crank handle turns effortlessly
  • Extra large, 5 ½” diameter hopper
  • Clamp on style easily attaches to any countertop (up to 1 ½”)
  • Rubber base protector keeps grinder from scratching the work surface
  • Adjustable burrs for grind control
  • Fully disassembles for quick & easy clean-up
  • One-year limited warranty
  • Heavy-duty, cast-iron construction

Comments (not moderated by Weston)



Average Customer Review: 1.5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
 
Missing Part and poor grind December 8, 2014
Reviewer: phoenix from Phoenix, AZ US  
The box seemed to have been opened previously, as the bolt to hold the handle was missing.( found one in my junk drawer that worked)  The bolt that was to vary the grind was too short by at least 1/8 inch. (back to the junk drawer to find a spacer that worked), only to find when grinding my corn, that the die had been cast off center and not true so that one side was very fine, the other coarse. Still works for what I had in mind for it. But don't plan to use it for your food. Waste of money.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Poor quality January 6, 2013
Reviewer: Roosterb4u from Hanahan, SC US  
The mill blade taped holes were out. I had to increase the size of the holes to match the the taped holes and drill the counter sink deeper. The front hood had cast excess that had to be ground away. And one side had to be ground flat enough for the wing nut to catch and not slip off. After I finished the work that should have been done prior to leaving their plant, it does a pretty good job of milling. Mill a cup of corn to shed the loose metal coating before use.

Was this review helpful to you?


Browse for more products in the same category as this item:

Shop by Category > Gadgets > Juicers and Mills
Shop by Category
Shop by Category > Gadgets
Shop by Category > Gadgets > Kitchen Gadgets
As Seen on The TODAY Show
2014 Summer Harvest Faves
Modern Homesteading